Products Categories
Contact Us
  • XPCB Limited

  • Tel: +86-755-2301 2705

  • E-mail: info@apexpcb.com

  • Add:Building 3, JinFeng Industry Area, Heping Community, Fuyong Town, Baoan District, Shenzhen, 518103, China

High End Rigid Flex Circuit Board

High End Rigid Flex Circuit Board

This rigid flex pcb is made with FR4 and PI. It is a 8 Layer HDI Rigid Flex PCB with 2 tier HDI vias. It means that Min hole is less than 0.15um, usually 0.1mm…. Send Inquiry

Send Inquiry

Product Introduction

This rigid flex pcb is made with FR4 and PI. It is a 8 Layer HDI Rigid Flex PCB with 2 tier HDI vias. It means that Min hole is less than 0.15um, usually 0.1mm. The Min. trace width/space is 0.1/ 0.1mm which is not easy to produce.

X-PCB is a quality and dedicated PCB supplier, especially excellent in Rigid Flex PCB, FPC, Multilayer PCB manufacturing. Our PCB factory with the area over 10000 sq. m, owns the state-of-the-art PCB manufacturing equipment.

The General Spec of the Rigid flex PCB

 

Base Material FR-4 Tg170 + PI
Structure 3R+2F+3R
Layer 8
Finished Board Thickness 1.6mm
Finished Copper Thickness 1 OZ
Surface Treatment Immersion AU
Silkscreen White
Min.T Race Width/Space 0.075/0.080mm
Min. Via 0.10mm
Shipping DHL, UPS, FedEX, Etc

 

 

Product Feature And Application

In the last step of the process a team of sharp-eyed inspectors give each PCB a final careful check-over. Visual checking the PCB against acceptance criteria and using X-PCB “approved” inspectors. Using manual visual inspection and AVI – compares PCB to gerber and has a faster checking speed that human eyes, but still requires human verification. All orders are also subjected to a full inspection including dimensional, solderability, etc.

The rigid flex printed wiring board is used in High-end Precise Industrial Sensor Control. The microvia is stacked, see the below Micro Section Picture. Most factory can’t produce this kind board which need high process capability. Its structure is 3F+5R which is asymmetric, so it is different to manufacture.

 

 

 

 

 

 

 

 

 

 

Why us?

● Provide one-stop service from the PCB design technical support, Prototyping, small batch trial production to mass production.

● RFQ generally will be responded in 8 hours, the conventional products can be quoted even in 2 hours.

● Competitive price: Highly automated equipment reduces our manufacture cost and improve efficiency. We always believe that only by providing competitive price which can make our customers more competitive, we can grow with our customers.

● High recognition from our customers: Our market is mainly in Eurpo, North America, Japan, Taiwan and China.

● Quick service response: Instant RFQ reply, the DFM could be raised on the same day.

Hot Tags: ,
Related Products